Please call (513) 325-7279 if you have any questions!
Corny Keg offers this TENNIS BALL REPRESSURIZER to help those running tennis camps, clubs, coaches or individuals save money and the Earth by repressurizing flat (dead) tennis balls to give them new life and make them last until the felt wears out. This repressurizer has a schrader valve to make pressurization easy, a two inch pressure guage that allows you to always see the amount of pressure inside of the tank, and a new lid that contains a safety pressure release device in case of accidental over pressurization keeping the unit safe to use.
This unit holds up to 60 tennis balls at a time and after two days to three weeks of pressurization gives new life to those dead tennis balls that generally just ended up in the landfill. This device saves clubs and individuals hundreds of dollars in new ball purchases and is safe and easy to operate.
Two to three day repressurization will only happen if you pressurize your tank with Carbon Dioxide (CO2). Check out our CO2 Charging Kit:
Drop any number of tennis balls up to 60 into the pressurization tank and reinstall the lid. The schrader valve allows easy pressurization with any air compressor or bicycle pump. Repressurization can be done at pressures from 24 psi to 50 psi depending on the time balls remain under pressure and the amount of bounce you desire. This process takes between three days and three weeks. When they are ready, pull the pressure release ring located in the new tank lid until all pressure is released. Then open the top and begin to enjoy your freshly repressurized tennis balls. After playing, the balls can be stored in the tank at 14-17 psi so that they will retain their internal pressure.
This unit is made from a used keg that has been cleaned and refurbished with new seals. While it may show some wear, our price certainly beats the $450 unit that is available elsewhere. This unit is also safe to use thanks to industrial grade parts and specially machined stainless steel fittings that are made to hold pressure. No parts are hammered together and held with glue and tape like some homemade units we have seen.
How it works!
Fill the tank with up to 60 used tennis balls.
Pressurize the tank.
2–3 days with a CO2 charging kit
Enjoy the fresh-out-of-the-can bounce of your tennis balls!
Appreciate the military type of special discount. I love the faucet assembly - used it in a party this week. One of course needs to use a teflon tape to seal the threaded connector.
Got a used all lock corny keg and couldn't be happier with it. There are quite a few places online to buy one but thankfully this will be the only place I go to for kegs and supplies going forward. A+
Great price. Used but good kegs. No issues with the jegs.
I was wary of used kegs but was more than pleased with the product. My kegs were received under pressure and signs of use were expected but mostly cosmetic. Also my order was fulfilled in a timely manner. I will go to them, and recommend them in the future.
Great customer service answered all my questions and concerns. Easy ordering and fast shipping. Purchased ball lock style, cleaning components, dispensing components and was satisfied with my whole experience. Have placed 4 different orders the past 4 weeks and plan on ordering even more very soon. Thank you and look forward to continue working with you guys. The coasters and stickers were an added bonus.
Ordered 6/29/2022 and a received 7/1/2022. Salesman had called previously to verify as to specifics of order which was very appreciatedand I changed my order based on what was recommended. Corny keg received is leak proof And CO2 regulator and other attachments appear to be in good working order. I would order from this company again without hesitation. An addition that I would add to this kit would be an attachment to fill a 32 ounce to 2 L soda bottle for carbonating regular water. Thx😊
These did great, the dents and scratches were very minor on all of these I received. Pressure holds up just fine, all came with new o-rings and we're relatively clean though I still washed them with PBW and sanitized before use.
Ordered my first set about 14 years ago when I started kegging instead of bottling my homebrew. Talked to them on the phone and explained to them that my home made kegerator could only accept the shorter Corny Kegs. He put me on hold and went out and measured the shortest ones he had and gave me the measurements. They worked and I ordered them. Got out of homebrewing for 10 years but now back into it. Still have the same kegerator. Called Corny Keg 2 weeks ago and Told them I need the shortest ones they have. I'm pretty sure I spoke with the same person from 14 years ago! He hooked me up with two more kegs that fit. These guys rock! Thanks for taking the time to treat your customers right. I raise my glass.
These aEB Ball Lock Kegs made in Italy are the BEST! Those made by other vendors from India & China are difficult to seal, generally leak, and are unstable.
I'm very pleased with the 3 Universal Lid With Manual Pressure Relief Valve I received, I got a few pinlock kegs converted to ball lock I'm using for pressure fermentation, fits perfectly thanks.
Great kegs, Dave is also so quick to reach out if any issues. An absolute pleasure to work with!
I’ve dealt with these guys for nearly 20 years! They know their stuff!
Product packed well and came in the mail quickly, satisfied with my purchase thanks.
We purchased several 4 packs of these reconditioned ball lock kegs and each one was decent quality, in good shape, had new gaskets, and were ready for use. As a new startup brewery, we need to keep our costs down while building our permanent inventory and this was a great purchase for us.